Furness Controls | InstruMetrics

FCO750 Production Line Leak Tester

israel — Mon, 05 Dec 2022 11:52:20 +0000

The FCO750 is an advanced multi-function pressure decay leak detector that is suited to applications
requiring multiple test configurations or flexible control of associated tooling.
The FCO750 can be easily interfaced to PLCs or PCs where integration is required, or in many cases
the built-in programmable I/O functions can remove the need for a PLC.
The communications facility may be used for configuration, control and data logging.

The post FCO750 Production Line Leak Tester appeared first on InstruMetrics.

FCO730 Production Line Leak Tester

israel — Sun, 04 Dec 2022 15:02:17 +0000

The FCO730 offers a cost effective and flexible solution to leak detection applications. Due to its compact size, the FCO730 is ideally suited to bench top mounting or integration into automated assembly fixtures where multiple test heads may be required.

The post FCO730 Production Line Leak Tester appeared first on InstruMetrics.

FCO754 Flow-Leak Tester

israel — Sun, 04 Dec 2022 14:42:45 +0000

Ideally suited for use in the gas industry, the FCO754 is also highly suitable for testing many other product types such as filters, heat exchangers and large vessels. So, if you are looking for a versatile leak tester that allows product fault rectification while live-testing, you’ve found the market leader, the FCO754.

The post FCO754 Flow-Leak Tester appeared first on InstruMetrics.

FCO794 Continuous Leak Tester

israel — Sun, 04 Dec 2022 14:13:52 +0000

This instrument performs well on large items where test stabilisation becomes a significant barrier to standard pressure decay tests.
The FCO794 provides an ideal solution for EV battery enclosure testing, as well as flow and leak testing on domestic gas appliances.

Enclosures for EV batteries are often complicated multi-port assemblies with many potential points of failure,
and usually contain large open volumes to complicate leak testing.
Using the FCO794 the enclosure can be continuously tested while adjustments to seals are made.
Furthermore, with a large isolated volume used as the pressure source, small leaks in the enclosure are easily detected
because drops in pressure translates to larger movements in air between the volume and the enclosures, amplifying sensitivity.

For many years the FCO794 has been used to test gas appliance sub-assemblies to all relevant European Standards.
Designed specifically to meet the requirements of the gas appliance industry, the FCO794 combines accuracy,
reliability and ease of use. Ideally suited for use in the gas industry, the FCO794 is also highly suitable
for testing many other product types such as filters, heat exchangers and large vessels.
So, if you are looking for a versatile leak tester that allows product fault rectification while live-testing,
you’ve found the market leader, the FCO794.

The post FCO794 Continuous Leak Tester appeared first on InstruMetrics.

FCO342 Differential Pressure Transmitter

admin — Tue, 15 Mar 2022 12:54:48 +0000

The linear output signal and display are verified with the Building Management System at a single source.
Integrated calibration ports to carry out instrument calibration without the need to disconnect the impulse lines, minimizing disruption to ongoing processes.
Separate local indications are redundant, resulting in reduced instrumentation and subsequent calibration overhead.

The post FCO342 Differential Pressure Transmitter appeared first on InstruMetrics.

FCO354 ATEX Certified Pressure Transmitter

admin — Tue, 15 Mar 2022 12:54:48 +0000

This transmitter has pressure ranges from 5 Pa full scale to 20 kPa full scale and is PC configurable which provides flexibility and reduced spare holding.

The post FCO354 ATEX Certified Pressure Transmitter appeared first on InstruMetrics.

FCO432 Differential Pressure Transmitter

admin — Tue, 15 Mar 2022 12:54:48 +0000

The FCO432 provides very high precision at the lowest pressures.
The 11 models start with the ±50Pa measurement range and graduate through to -1bar to +10bar,
each with an accuracy of <0.25% of reading. The pressure cell is based on the sensor’s proven reliability.
A microcontroller is used to control all functions of stability, such as temperature correction and display damping.

Available with standard 2-wire 4-20mA and 4-wire isolated 4-20mA current output, as well as voltage options,
the FCO432 can fit into a variety of industrial set-ups.
Additional flexibility is provided by USB, RS232, and RS485 communication options.

The differential pressure transmitter comes with two display options.
There is the choice between a large character, low power LCD display, which is fully compatible with 4-20mA options,
or a high brightness, illuminated OLED display (this requires a separate 24V power supply),
enabling the device to be used for a multitude of applications. Alternatively, the device can be used blind, without a display.

There are two ways in which to configure the FCO432. A membrane keypad is available as an optional extra for easy,
on-device field configuration. Otherwise, the configuration can be carried out using the provided FCS541 utility software
and internal Micro-USB connection.

By using one of these methods, the transmitter can be configured in a multitude of ways.
The output is scalable as linear to differential pressure, or as a square-root function to facilitate
the use of Pitot Static Tubes or other primary flow elements.

The two independent trip level relays can be set to indicate an alarm signal at either predefined levels,
or within a predefined pressure band.

The post FCO432 Differential Pressure Transmitter appeared first on InstruMetrics.

FCO560 Portable Calibrator and Precision Manometer

admin — Tue, 15 Mar 2022 12:54:48 +0000

Measurement mode provides a versatile precision micro-manometer that may be combined with laminar flow elements or pitot tubes for measurement of velocity, volumetric flow, and mass flow.

In calibration mode the FCO560’s multiple sensor configurations allow different external references to be used quickly and simply. When combined with laminar flow elements, the FCO560 may be used as a flow calibrator covering flows from less than 1 ml/min to over 30000 l/min. An external pressure sensor may also be used as a reference for calibrating pressures much higher than the FCO560’s differential pressure range.

When used for site calibrations, the FCO560 may be preconfigured with information for up to 99 different instruments to be calibrated. For bench use, these configurations are useful for rapidly changing between commonly used setups.

The FCO560 is a versatile and highly-accurate flow and pressure measurement device, with an accuracy of greater than 0.1% of reading at pressures down to 1 Pa. The instrument is widely used in a variety of applications, such as fan manufacture and wind tunnel operation, and is able to automatically compensate for temperature and local pressure variations.

The post FCO560 Portable Calibrator and Precision Manometer appeared first on InstruMetrics.

FCO750F Pressure Relief Valve Tester

admin — Tue, 15 Mar 2022 12:54:47 +0000

The FCO750 with custom firmware for pressure relief valve testing provides a comprehensive system for testing across a wide range of pressures, the full functionality of a valve. This can include leak testing at nominal pressure-“n%”, opening point by means of the Ramp test, and re-seat point. Tolerances either side of the nominal pressure are derived from programmable limits set according to the application and these are applied to all three of the test phases.

The post FCO750F Pressure Relief Valve Tester appeared first on InstruMetrics.

FCS456 Multi-Channel Sequence Box

admin — Tue, 15 Mar 2022 12:54:47 +0000

The FCS456 has built-in control for parallel filling of the test group but most importantly,
individual stabilization and measurement phases. This combined with individual pass/fail indication
eliminates uncertainty by providing a result per part. Linked to one of our advanced automated leak detectors,
the parameters can be tuned and set optimally, whether you are testing identical groups of parts or a collection of similar components.
The only criteria are that the test pressure is the same for all in the group.

Virtually any item which lends itself to leak testing at positive or vacuum pressure can be tested with greatly reduced cycle time when grouped together and tested using the FCS456.

The post FCS456 Multi-Channel Sequence Box appeared first on InstruMetrics.