The post DPI610E Series pressure calibrator appeared first on InstruMetrics.

The post Temperature Chamber Ultar Low appeared first on InstruMetrics.

The new Thermocouple Fixture slide into the well of the temperature calibrator and guarantee easy handling of up to 48 TCs ensuring that all are securely held at full immersion depth.

The post LTR-150 Dry Block and Liquid Bath appeared first on InstruMetrics.

The new Thermocouple Fixture guarantees easy handling of up to 48 TC’s ensuring that all are securely held at full immersion depth.

The post Kaye HTR-420 appeared first on InstruMetrics.

In calibration mode the FCO560’s multiple sensor configurations allow different external references to be used quickly and simply. When combined with laminar flow elements, the FCO560 may be used as a flow calibrator covering flows from less than 1 ml/min to over 30000 l/min. An external pressure sensor may also be used as a reference for calibrating pressures much higher than the FCO560’s differential pressure range.

When used for site calibrations, the FCO560 may be preconfigured with information for up to 99 different instruments to be calibrated. For bench use, these configurations are useful for rapidly changing between commonly used setups.

The FCO560 is a versatile and highly-accurate flow and pressure measurement device, with an accuracy of greater than 0.1% of reading at pressures down to 1 Pa. The instrument is widely used in a variety of applications, such as fan manufacture and wind tunnel operation, and is able to automatically compensate for temperature and local pressure variations.

The post FCO560 Portable Calibrator and Precision Manometer appeared first on InstruMetrics.

The post Calibration Bath 22 – 50 L appeared first on InstruMetrics.

The post DewPro MMY30 Dew Point Transmitter appeared first on InstruMetrics.

The range of compressors is designed to test, adjust and
calibrate measuring instruments mechanical or electronic
pressure by comparison (pressure gauges, pressure
transmitters or sensors or switches).
These generators are equipped with a pressure tank visible
level, two valves connected by a set of two-stage variable
volumes. The capstan can generate pressure pushing
the fluid through the variable volumes to fittings provided for
receiving pressure instruments.
These compressors are designed for industry or laboratory. They
are robust and easy to use and have a very high long-term
stability.
They have the opportunity to grow in deadweight tester by
simply adding a kit with a set piezometric and a set of
weights.

The post Comparator High Performance CO-1000B appeared first on InstruMetrics.

Range of Deadweight tester is designed to test, adjust and calibrate
measuring instruments, mechanical or electronic pressure by
comparison (pressure gauges, pressure transmitters or sensors or
switches)
The deadweight tester is constituted by a pressure generator, a
piston/cylinder unit, a set of weighing identified and of a computer on
which is posted: the position of the piston and the value of pressure
generated by the dead weight according to the various physical
quantities.
The capstan allows adjusting the pressure by compressing the gas
through the piston. This pressure is balanced by the set piston/cylinder
what allows us to compare the instrument to be calibrated in the values of
pressures generated by the standard and indicated on the calculator.
These deadweight are intended for the calibration in relative pressure.
This reference instrument is used in a factory or calibration
laboratory. They are robust and easy to use and have high longterm stability.

The post Deadweight tester BA4-200B appeared first on InstruMetrics.

• Cover a wide range of pressure ranges:
  From 25mbar to 1400bar in Absolute, Gauge, and Differential configurations.
• Plug and Play sensors:
  Each pressure sensor holds it is own calibration data (including date of calibration) With a single DPI 705E you can fit any of the remote sensors to swap pressure ranges in seconds.
• Temperature capability:
  Optional remote plug and play Resistance Temperature Detector (RTD) sensors.
• Enhanced accuracy:
  Total 1-year uncertainty up to 0.05% full scale (FS) over a temperature range of -10°C to +50°C.
• Enhanced leak timer:
  Leak test mode now rapidly configurable between 1, 3, or 5 minutes.
• Enhanced battery life:
  Power-efficient design can be used for 8 hours per day, 6 days per week for 1 Year using a single set of batteries.
• Hazardous Area version available.

The post DPI 705e & DPI 705e-is appeared first on InstruMetrics.