FIZEPR | InstruMetrics https://instrumetrics.com/product-tag/fizepr/ InstruMetrics Engineering Thu, 06 Mar 2025 09:00:58 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://instrumetrics.com/wp-content/uploads/2022/04/cropped-favicon-32x32.png FIZEPR | InstruMetrics https://instrumetrics.com/product-tag/fizepr/ 32 32 Moisture Meter for Liquid Materials SW100.20 https://instrumetrics.com/product/moisture-meter-for-liquid-materials-sw100-20/ https://instrumetrics.com/product/moisture-meter-for-liquid-materials-sw100-20/#respond Sun, 15 Jan 2023 18:13:54 +0000 https://instrumetrics.com/?post_type=product&p=5106 The moisture meter FIZEPR-SW100.20, -SW100.21, -SW100.12  is designed  to measure moisture in liquid materials, such as oil, fuel oil, petroleum, alcohol, coal-water slurry fuel (CWSF or CWS or CWF -  is a fuel which consists of fine coal particles suspended in water), sludge, etc.

The post Moisture Meter for Liquid Materials SW100.20 appeared first on InstruMetrics.

]]> The device consists of an electronic unit and a sensor.

The moisture meter is available in several versions with different nominal bore:
DN 50, DN 80 and DN 125 mm, and different allowable pressure: PN 1.6 (16 atm);
РN 2.5 (25 atm); РN 4.0 (40 atm); РN 6.3 (63 atm) and РN 10.0 (100 atm).

Length, diameter, nominal pressure, flange types, operational temperature and other moisture analyzer parameters can be adjusted
according to customer requirements.

The moisture control device can be equipped with an electronic unit either in general purpose industrial version or version with 1ExdIIBT5, IP66 certified explosion-proof enclosure.

The post Moisture Meter for Liquid Materials SW100.20 appeared first on InstruMetrics.

]]> https://instrumetrics.com/product/moisture-meter-for-liquid-materials-sw100-20/feed/ 0 MOISTURE METER FOR BULK MATERIALS FIZEPR-SW100.10 https://instrumetrics.com/product/moisture-meter-for-bulk-materials-fizepr-sw100-10/ https://instrumetrics.com/product/moisture-meter-for-bulk-materials-fizepr-sw100-10/#respond Tue, 15 Mar 2022 12:54:48 +0000 https://instrumetrics.com?post_type=product&p=859 The FIZEPR Moisture meter is designed to measure the moisture of bulk materials in hoppers, dispensers, and conveyors.
Controlled materials: crushed stone, gravel, sand, ore, sawdust, and wood chips, as well as mixed feed, grain, flour, seeds, and other agricultural products.
Materials that are characterized by high electrical conductivity:Soda, aluminum hydroxide, certain types of ore, NaCl salts, KCl, and other materials.

The post MOISTURE METER FOR BULK MATERIALS FIZEPR-SW100.10 appeared first on InstruMetrics.

]]> The principle of moisture meter operation is based on environmental sensing using VHF band waves. Unlike microwave moisture meters, in which centimeter wavelength is used, this device can be used for gravel, rubber, wood chips, etc.
The construction of the sensor is leak-proof and provides high reliability and mechanical stability.
Using stainless steel and ceramic seals provides resistance to corrosion and the possibility of probe application in drying machines with temperatures more than 200 °C.

High accuracy of measurement by averaging measurement results over the entire material volume.

The moisture meter sensors for bulk materials are available in two versions with different probe types:
1. The sensor probe is formed as a straight rod with the ends fixed by special couplings on the opposite walls of the hopper. The sensor provides control of the greater volume of material and offers an accurate assessment of moisture in the material with inhomogeneous moisture distribution.
2. The sensor probe is configured as a flat-topped bracket which is mounted on the wall of the hopper via couplings. Or mounted in the screw, cyclone outlet.

 

The post MOISTURE METER FOR BULK MATERIALS FIZEPR-SW100.10 appeared first on InstruMetrics.

]]> https://instrumetrics.com/product/moisture-meter-for-bulk-materials-fizepr-sw100-10/feed/ 0