Condec | InstruMetrics

PIN8000/PIN8010 Pneumatic HI Source Pressure Intensifier

admin — Tue, 15 Mar 2022 12:53:15 +0000

PIN8000 Pneumatic Pressure Intensifier operates using any clean dry air or gaseous nitrogen. Containing an automatic precision intensifying system, generate up to 10 times the input pressure. This easy-to-operate system provides fingertip control within the exclusive patented precision Orion 3A valve. By utilizing the soft-seal micro-metering valves for pressure adjustment and venting, in conjunction with the vernier, user gains finite control to obtain exact pressure readings.

The post PIN8000/PIN8010 Pneumatic HI Source Pressure Intensifier appeared first on InstruMetrics.

Source 3000 Portable Pneumatic Pressure Source

admin — Tue, 15 Mar 2022 12:53:15 +0000

Source 3000 offers a clean, dry pressure source up to 3,000 psi. It is equipped with a large-capacity nitrogen cylinder so you won’t run out in the middle of a job, and eliminates the inconvenience and physical stress of hand pumps. It has two ports for connecting to a measuring device and virtually any electronic calibrator.

The post Source 3000 Portable Pneumatic Pressure Source appeared first on InstruMetrics.

Condec CYLinder REGulator

admin — Tue, 15 Mar 2022 12:53:15 +0000

Condec’s Cylinder Regulator (CYLREG) assembly allows the operator to ensure a properly regulated pressure output from an existing in-house nitrogen supply cylinder that has a maximum charge of 3,000 psig. CYLREG has a maximum input pressure rating of 3,000 psig and a maximum operator controlled regulated output pressure based on selected model.

Low torque required by operator for pressure adjustment
Single stage, venting type with spring controlled piston
Integral inlet filter used to promote long life when used in clean systems
CGA-580 fitting for direct connection to the in-house cylinder
1/4 inch, 37 degree male output port connection

The post Condec CYLinder REGulator appeared first on InstruMetrics.

Orion 2C/Orion 3A Precision Pneumatic Controllers

admin — Tue, 15 Mar 2022 12:53:15 +0000

Orion 2C and Orion 3A pneumatic pressure controllers provide an exclusive precision vernier for exact pressure settings. These easy-to-use manifolds feature soft seat construction and an adjustable stop that resists over tightening. Fingertip adjustment provides ultra-fine measurement that eliminates overshoot. Two test ports on panel mountable units allow for multiple applications.

- Orion 2C, non-cased/cased versions: Up to 3,000 psi
- Orion 3A, non-cased version: Up to 10,000 psi
- Orion 3A, cased version: Up to 10,000 psi based on model
Orion 2C: Aluminum body, Buna-N o-rings standard
Orion 3A: Stainless steel body, Viton o-rings standard
Precision patented vernier to precisely “dial in” a selected pressure
Fingertip closed system pressure adjustment to better than 0.0005 psi
Soft seat construction and adjustable stop; immune to over tightening
Two low-torque, fine micro-metering valves with positive shut off

The post Orion 2C/Orion 3A Precision Pneumatic Controllers appeared first on InstruMetrics.

UVC1000/UVC1010 Vacuum Generator/Pressure Controller

admin — Tue, 15 Mar 2022 12:53:15 +0000

UVC1000 vacuum generator/pressure controller packs a lot of performance into one affordable instrument. This efficient unit contains a built-in vacuum converter that works with existing shop air to power up to 29 inches of mercury vacuum. The complete mechanical operation allows operators to utilize the UVC1000 in areas that are off-limits to vacuum pumps. As a result, the UVC1000 eliminates fumes and vibrations that are dangerous in nuclear power plants, oil refineries, and other hazardous environments. Its lightweight structure and compact design provide quick and convenient performance. This versatile unit can also be used to control and regulate positive pressure. 19-inch rack-mount UVC1010 is great for applications where portability is not as important.

The post UVC1000/UVC1010 Vacuum Generator/Pressure Controller appeared first on InstruMetrics.

UPC5200/UPC5210 High Pressure Calibration Standard

admin — Tue, 15 Mar 2022 12:53:15 +0000

UPC5200 excels in applications presenting pressure levels up to 10,000 psi. Featuring automatic pushbutton calibration, this unit guarantees 0.05% accuracy in three switch-selectable ranges. The exclusive patented precision pressure Orion 3A vernier provides infinite control to obtain exact pressure readings, while a reliable overpressure regulator protects units under test from permanent damage.

The fully-pneumatic UPC5200 is powered by nitrogen and eliminates the mess and oil thermal equilibrium problems common to hand pump hydraulic systems. The clean operation makes this calibrator ideal for use in aerospace, food and beverage, and general industry.

Available in an enclosure with carrying handles (UPC5200) or 19-inch wide rack-mountable version (UPC5210)
Two sets of ranges to choose from: 10,000/5,000/2,000 psi and 5,000/2,500/1000 psi
±0.05% F.S. accuracy of each independently selectable range
Electronically controlled 10:1 intensifier system
Adjustable overpressure protection above input pressure
Precision pressure vernier control
Voltage/current display mode for transducer testing
32 VDC excitation output
Non-destructible, fingertip control micro metering valves for pressure control
Quick-disconnect fitting and hose included
Pneumatic only; no hydraulics or distilled water messes
External portable pressure cylinder included with UPC5200

The post UPC5200/UPC5210 High Pressure Calibration Standard appeared first on InstruMetrics.

MPV-10K Micro-metering Precision Valve

admin — Tue, 15 Mar 2022 12:53:15 +0000

The MPV-10K fine micro-metering valve with positive shut off. An adjustable stop with a soft seat prevents over-tightening. Each valve is customized with O-rings constructed from one of four materials for a specific operation. Fingertip adjustment up to 10,000 psi provides high-accuracy metering in a variety of gas and fluid applications. From process plant instrumentation to semi-conductor production, natural gas systems to oxygen service, the MPV-10K is the ideal choice for precision micro-metering.

Fine micro-metering valve with positive shut off
Adjustable stop, soft seat. No over-tightening.
Stainless steel
Fingertip adjust—even at 10,000 psi
Viton O-rings standard; other materials available by request
The valve can be panel or bracket mounted

Applications

Gas and fluid applications
High purity systems
Medical and Bio-chemical gas analysis
Natural gas systems
Semi-conductor production
Pollution analysis instrumentation
Process plant instrumentation
Solvent systems
Chromatography
Mass spectroscopy
Research laboratory sampling
Oxygen service
Machine cutting tools

The post MPV-10K Micro-metering Precision Valve appeared first on InstruMetrics.