Process Instrumentation | InstruMetrics

HE205 series

Ariel Oren — Tue, 23 Jan 2024 17:58:35 +0000

The Type HE205 vibration monitoring unit measures and monitors vibration acceleration on machines.

The post HE205 series appeared first on InstruMetrics.

HE101 series

Ariel Oren — Tue, 23 Jan 2024 17:39:40 +0000

The Type HE101 vibration monitoring unit is used to measure and monitor absolute bearing vibrations and bearing temperatures in machines in line with DIN ISO 10816.

Features

Measurement value: The effective value (rms) of the vibration velocity in mm/s, in accordance with DIN ISO 2954.
Measurement value: The temperature in °C.
Analogue current output: Interference-free DC signals from 4…20 mA, proportional to the measuring range of the monitoring unit
Approvals: CE, ATEX, EAC, EAC Ex, IEC, IEC Ex, UL

The post HE101 series appeared first on InstruMetrics.

HE100 Vibration Sensor

Ariel Oren — Tue, 23 Jan 2024 11:17:07 +0000

The Type HE100 vibration monitoring unit is used to measure and monitor absolute bearing vibrations in machines in line with DIN ISO 10816.

Features

Operating principle: The two-wire system
Measurement value: The effective value (rms) of the vibration velocity in mm/s, in accordance with DIN ISO 2954
Analogue current output: Interference-free DC signals from 4…20 mA, proportional to the measuring range of the monitoring unit
Approvals: CE, ATEX, EAC, EAC Ex, IEC, IEC Ex, UL

The post HE100 Vibration Sensor appeared first on InstruMetrics.

CDM Chemical Density Meter

Ariel Oren — Tue, 14 Nov 2023 13:56:33 +0000

Rhosonics CDM Chemical-based slurry Density Meter.

The CDMs have a robust design that uses sensors made of highly corrosion and abrasion-resistant materials, enabling them to withstand rough process conditions.

In various industries, the Chemical Density Meters are used whenever there is a requirement for measuring chemical-based slurries or liquors. Some of the sectors where this technology is used are Mining, Ore refineries and Pulp & Paper.

The post CDM Chemical Density Meter appeared first on InstruMetrics.

SDM Slurry Density Meter

israel — Sun, 15 Jan 2023 18:57:47 +0000

This instrument uses a non-intrusive ultrasonic sensor to measure the real-time density of mineral slurries under high-density levels
and at very large pipes. The SDMs have a robust design with sensors that are made of highly abrasion-resistant materials to withstand
rough process conditions.

The post SDM Slurry Density Meter appeared first on InstruMetrics.

Moisture Meter for Liquid Materials SW100.20

israel — Sun, 15 Jan 2023 18:13:54 +0000

The device consists of an electronic unit and a sensor.

The moisture meter is available in several versions with different nominal bore:
DN 50, DN 80 and DN 125 mm, and different allowable pressure: PN 1.6 (16 atm);
РN 2.5 (25 atm); РN 4.0 (40 atm); РN 6.3 (63 atm) and РN 10.0 (100 atm).

Length, diameter, nominal pressure, flange types, operational temperature and other moisture analyzer parameters can be adjusted
according to customer requirements.

The moisture control device can be equipped with an electronic unit either in general purpose industrial version or version with 1ExdIIBT5, IP66 certified explosion-proof enclosure.

The post Moisture Meter for Liquid Materials SW100.20 appeared first on InstruMetrics.

663 Vibration Switch

admin — Tue, 15 Mar 2022 12:55:11 +0000

The Type 663 vibration monitoring unit is used to measure and monitor absolute bearing vibrations in machines in line with DIN ISO 10816.

Features

Two limit values and associated delay times are separately adjustable.
Both relay outputs indicate if the corresponding set limit values are exceeded. This can be used to generate a preliminary and a main alarm.
Measurement value: The effective value (rms) of the vibration velocity (mm/s).
Approvals: CE, ATEX, EAC, EAC EX, SIL2 / PL-d

The post 663 Vibration Switch appeared first on InstruMetrics.

HE200 Vibration Switch

admin — Tue, 15 Mar 2022 12:55:11 +0000

The Type 663 vibration monitoring unit is used to measure and monitor absolute bearing vibrations in machines in line with DIN ISO 10816 and 20816.

Features

Two limit values and associated delay times are separately adjustable.
Both relay outputs indicate if the corresponding set limit values are exceeded. This can be used to generate a preliminary and a main alarm.
Measurement value: The effective value (rms) of the vibration velocity (mm/s).
Approvals: CE, ATEX, EAC, EAC EX, IEC, IEC Ex, SIL2 / PL-d (TÜV-Süd), C UL.

The post HE200 Vibration Switch appeared first on InstruMetrics.

HE050 Vibration Switch

admin — Tue, 15 Mar 2022 12:55:11 +0000

The vibration monitor type HE050 is an IO‑Link sensor for measuring the vibration speed/acceleration and can be used, for example, to monitor the absolute bearing vibration on machines based on the DIN ISO 10816 standard.

features

Two freely configurable outputs
Output 1: IO-Link or digital switching output
Output 2: Analog current output (4…20 mA) or digital switching output. Many setting options available
Configurable frequency range e.g. 10 Hz … 1000 Hz or 10 Hz … 500 Hz
Optional functional safety SIL 1

The post HE050 Vibration Switch appeared first on InstruMetrics.

MOISTURE METER FOR BULK MATERIALS FIZEPR-SW100.10

admin — Tue, 15 Mar 2022 12:54:48 +0000

The principle of moisture meter operation is based on environmental sensing using VHF band waves. Unlike microwave moisture meters, in which centimeter wavelength is used, this device can be used for gravel, rubber, wood chips, etc.
The construction of the sensor is leak-proof and provides high reliability and mechanical stability.
Using stainless steel and ceramic seals provides resistance to corrosion and the possibility of probe application in drying machines with temperatures more than 200 °C.

High accuracy of measurement by averaging measurement results over the entire material volume.

The moisture meter sensors for bulk materials are available in two versions with different probe types:
1. The sensor probe is formed as a straight rod with the ends fixed by special couplings on the opposite walls of the hopper. The sensor provides control of the greater volume of material and offers an accurate assessment of moisture in the material with inhomogeneous moisture distribution.
2. The sensor probe is configured as a flat-topped bracket which is mounted on the wall of the hopper via couplings. Or mounted in the screw, cyclone outlet.

The post MOISTURE METER FOR BULK MATERIALS FIZEPR-SW100.10 appeared first on InstruMetrics.