• When 4116 is used in combination with the PR 4500 display series,
all operational parameters can be modified to suit any application.
• As the 4116 is designed with electronic hardware switches,
it is not necessary to open the device to the setting of DIP switches.
• A green/red front LED indicates normal operation and malfunction.
A yellow LED is ON for each active output relay.
• Continuous check of vital stored data for safety reasons.
• 4-port 2.3 kVAC galvanic isolation.

Mounting/installation / programming
• Very low power consumption means units can be mounted side by side
without an air gap – even at 60°C ambient temperature.
• Configuration, monitoring, 2-point process calibration, and more
are accomplished using PR's 4500 series of detachable displays.
• All programming can be password-protected.

The post PReasy 4000 series appeared first on InstruMetrics.

• The front-operated push buttons are used to program the different standard functions.
• A password can prevent access to changing parameters.

Application

• An alarm detector is connected to the measurement of AC/DC or voltage signals.
• The unit is used where accurate setpoint settings and different alarm functions are required.
• The unit can be used as a single or dual-trip amplifier.
• Used in applications where programmable parameters such as hysteresis, setpoint, reset, active relay for increasing or decreasing signal, delay, and input signal need to be set.

Technical characteristics

• 3-digit display showing the input signal in %.
• Two LEDs indicating relay status.
• 3 pushbuttons for programming.
• Standard DC input signals in the range 0…20 mA.
• DC voltage signals in the range 0…250 VDC.
• AC signals up to 1 A.
• True RMS measurement of AC voltage signals in the range 0…250 VAC.
• Mounting for a standard 11-pole socket which can be adapted for DIN rail or plate use with PR’s 7023 adaptor and 7024 mounting keying.

The post מתג חכם – 2231 appeared first on InstruMetrics.

הרכבה / התקנה
• לראש חיישן DIN טופס B או הרכבה על מסילת DIN עם התאמה מיוחדת.
• הערה: כמו I.S. / מחסום אקס עבור 5343B אנו ממליצים על 5104B, 5114B או 5116B.

The post משדרי טמפרטורה appeared first on InstruMetrics.

Mounting / installation
• Mounted vertically or horizontally on a DIN rail.
Up to 84 channels per meter can be mounted.

The post Frequency Pulse appeared first on InstruMetrics.

• The 5531 indicator is powered by the 4 to 20 mA current loop and is easily scaled to display the correct process value.
• Because it does not require separate power wiring, the 5531 is perfect for remote display of process loops.
• The 5531B can be mounted in Ex Zone 1.
• The 5531B1 Ex-display includes the 8501 enclosure and can be mounted in Ex Zone 2 or 22 (gas or dust).
• The 5531B2 includes the 8501 enclosure and can be mounted in Ex Zone 1, 2, 21 or 22 (gas or dust).

Technical characteristics

• With a full measurement range of 3.6 to 23 mA, the 5531 is NAMUR NE43 compliant.
• The display can be push-button scaled to any range between -9999 to 9999, and reverse display action is possible.
• The LCD backlight can be set to half or full intensity for easy viewing in low-light conditions.
• The display only requires 1.5 VDC, (75 Ω loop load), with the backlight turned off.
• The input is HART transparent.
• The front push buttons can be disabled to prevent unauthorized adjustment.

Mounting/installation

• Once the panel is mounted with the included gasket, the 5531 provides IP65 ingress protection.

The post פאנל תצוגה – Loop-powered LCD indicator -5531B appeared first on InstruMetrics.