Flow Technology | InstruMetrics https://instrumetrics.com/product-tag/flow-technology/ InstruMetrics Engineering Sun, 21 Aug 2022 14:05:41 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://instrumetrics.com/wp-content/uploads/2022/04/cropped-favicon-32x32.png Flow Technology | InstruMetrics https://instrumetrics.com/product-tag/flow-technology/ 32 32 UniProbe flow no flow switch https://instrumetrics.com/product/uniprobe-flow-no-flow-switch/ https://instrumetrics.com/product/uniprobe-flow-no-flow-switch/#respond Tue, 15 Mar 2022 12:52:53 +0000 https://instrumetrics.com?post_type=product&p=687 The UniProbe Flow-No-Flow Switches, Models UP01, and SP01 are sensitive to the heat dissipation of a fluid. The stainless steel probe houses temperature sensors and a heater element. This combination monitors changes in heat transfer to the fluid. The rate of heat transfer is proportional to the flow rate; therefore, a change from flow to no-flow is detected by the amplifier and causes a relay to switch. The relay contacts may be connected to operate a warning, shut down equipment, or control a process parameter. The UniProbe Flow-No-Flow Switch is user-selectable for liquid or gas operation and comes factory-adjusted

The post UniProbe flow no flow switch appeared first on InstruMetrics.

]]> The UniProbe Flow-No-Flow Switches, Models UP01, and SP01 are sensitive to the heat dissipation of a fluid. The stainless steel probe houses temperature sensors and a heater element. This combination monitors changes in heat transfer to the fluid. The rate of heat transfer is proportional to the flow rate; therefore, a change from flow to no-flow is detected by the amplifier and causes a relay to switch. The relay contacts may be connected to operate a warning, shut down equipment, or control a process parameter. The UniProbe Flow-No-Flow Switch is user-selectable for liquid or gas operation and comes factory-adjusted

The post UniProbe flow no flow switch appeared first on InstruMetrics.

]]> https://instrumetrics.com/product/uniprobe-flow-no-flow-switch/feed/ 0 Tricklemeter https://instrumetrics.com/product/tricklemeter/ https://instrumetrics.com/product/tricklemeter/#respond Tue, 15 Mar 2022 12:52:36 +0000 https://instrumetrics.com?post_type=product&p=642 The Flow Technology TrickleMeter is ideal for measuring very low flows of low to high viscosity liquids. Its positive displacement design provides rugged, reliable operation for a variety of industrial applications. The SRP sensor is specially matched to the TrickleMeter providing a reliable pulse output at the full range of flows.

The post Tricklemeter appeared first on InstruMetrics.

]]> The Flow Technology TrickleMeter is ideal for measuring very low flows of low to high viscosity liquids. Its positive displacement design provides rugged, reliable operation for a variety of industrial applications. The SRP sensor is specially matched to the TrickleMeter providing a reliable pulse output at the full range of flows.

The post Tricklemeter appeared first on InstruMetrics.

]]> https://instrumetrics.com/product/tricklemeter/feed/ 0 Turbine Flow Meter – FT Series Gas https://instrumetrics.com/product/turbine-flow-meter-ft-series-gas/ https://instrumetrics.com/product/turbine-flow-meter-ft-series-gas/#respond Tue, 15 Mar 2022 12:52:36 +0000 https://instrumetrics.com?post_type=product&p=644 FT Series flow meters are used in a wide variety of applications. Some examples are automotive and aerospace test stands; subsea control systems; feedback and control systems on aero-derivative turbine generators; as well as general-purpose industrial flow measurements.

The post Turbine Flow Meter – FT Series Gas appeared first on InstruMetrics.

]]> The full range of bearings, end connections, calibrations, and electronics are available for this series making it the most versatile, capable of meeting a wide range of applications.

The post Turbine Flow Meter – FT Series Gas appeared first on InstruMetrics.

]]> https://instrumetrics.com/product/turbine-flow-meter-ft-series-gas/feed/ 0 Turbine Flow Meter – FTO Series https://instrumetrics.com/product/turbine-flow-meter-fto-series/ https://instrumetrics.com/product/turbine-flow-meter-fto-series/#respond Tue, 15 Mar 2022 12:52:36 +0000 https://instrumetrics.com?post_type=product&p=645 The Omniflo® turbine flow meters utilize a low frictional drag bearing in a tangential design allowing the measurement of very low flow rates in either liquid or gas. This high resolution, low flow sensing instruments are capable of measuring flow rates as low as 0.001 GPM in liquids and 0.0015 ACFM in gasses.

The post Turbine Flow Meter – FTO Series appeared first on InstruMetrics.

]]> The Omniflo® turbine flow meters utilize a low frictional drag bearing in a tangential design allowing the measurement of very low flow rates in either liquid or gas. This high resolution, low flow sensing instruments are capable of measuring flow rates as low as 0.001 GPM in liquids and 0.0015 ACFM in gasses.

The post Turbine Flow Meter – FTO Series appeared first on InstruMetrics.

]]> https://instrumetrics.com/product/turbine-flow-meter-fto-series/feed/ 0 Turbine Flow Meter – HS Series https://instrumetrics.com/product/turbine-flow-meter-hs-series/ https://instrumetrics.com/product/turbine-flow-meter-hs-series/#respond Tue, 15 Mar 2022 12:52:36 +0000 https://instrumetrics.com?post_type=product&p=646 HS Series "high shock" turbine flow meters are specifically designed to withstand pressure spikes that create hydraulic shock waves in fluids when actuators or rams are activated. This water hammer effect can dislodge the internals or sheer rotor blades off other turbine designs. The HS Series is based on the FT design providing the same high level of accuracy, with added benefits of a ruggedized housing and reinforced rotor to eliminate potential damage from fluid shock.

The post Turbine Flow Meter – HS Series appeared first on InstruMetrics.

]]> HS Series “high shock” turbine flow meters are specifically designed to withstand pressure spikes that create hydraulic shock waves in fluids when actuators or rams are activated. This water hammer effect can dislodge the internals or sheer rotor blades off other turbine designs. The HS Series is based on the FT design providing the same high level of accuracy, with added benefits of a ruggedized housing and reinforced rotor to eliminate potential damage from fluid shock.

The post Turbine Flow Meter – HS Series appeared first on InstruMetrics.

]]> https://instrumetrics.com/product/turbine-flow-meter-hs-series/feed/ 0 Turbine Flow Meter – SA Series https://instrumetrics.com/product/turbine-flow-meter-sa-series/ https://instrumetrics.com/product/turbine-flow-meter-sa-series/#respond Tue, 15 Mar 2022 12:52:36 +0000 https://instrumetrics.com?post_type=product&p=647 Flow Technology's sanitary turbine flow meters provide accuracy, versatility, and economy in measuring a wide variety of beverage and pharmaceutical products. Flow Technology's more than 50 years experience enables the company to produce an extremely durable sanitary turbine flowmeter with a smooth finish which is designed to eliminate cracks and crevices where bacteria can breed.

The post Turbine Flow Meter – SA Series appeared first on InstruMetrics.

]]> Flow Technology’s sanitary turbine flow meters provide accuracy, versatility, and economy in measuring a wide variety of beverage and pharmaceutical products. Flow Technology’s more than 50 years experience enables the company to produce an extremely durable sanitary turbine flowmeter with a smooth finish which is designed to eliminate cracks and crevices where bacteria can breed.

The post Turbine Flow Meter – SA Series appeared first on InstruMetrics.

]]> https://instrumetrics.com/product/turbine-flow-meter-sa-series/feed/ 0 SL9000 Series Flow Computers https://instrumetrics.com/product/sl9000-series-flow-computers/ https://instrumetrics.com/product/sl9000-series-flow-computers/#respond Tue, 15 Mar 2022 12:52:35 +0000 https://instrumetrics.com?post_type=product&p=630 The SL9000 Series Flow Computers are panel mounted units capable of linearization, temperature compensation for liquids, as well as temperature and pressure compensation for gases.

The post SL9000 Series Flow Computers appeared first on InstruMetrics.

]]> This flexible series of flow computers are fully programmable through the front keypad or with PC based software. The units can display and provide an analog output in volumetric or mass units of measure. Pulse and relay outputs are available for alarms or batch control.

The post SL9000 Series Flow Computers appeared first on InstruMetrics.

]]> https://instrumetrics.com/product/sl9000-series-flow-computers/feed/ 0 PD Flowmeter BR3000 Rate and Total Display https://instrumetrics.com/product/pd-flowmeter-br3000-rate-and-total-display/ https://instrumetrics.com/product/pd-flowmeter-br3000-rate-and-total-display/#respond Tue, 15 Mar 2022 12:51:59 +0000 https://instrumetrics.com?post_type=product&p=523 Battery or DC power and a compact size make the BR3000 Series Rate/Totalizer a versatile local indicator.

The post PD Flowmeter BR3000 Rate and Total Display appeared first on InstruMetrics.

]]> It accepts magnetic pickup and DC pulse inputs. Rate and total are shown simultaneously on the easy-to-read, two-line, LCD display. Twenty point linearization is a standard feature, allowing correction for K-factor variation, thus improving accuracy.

The post PD Flowmeter BR3000 Rate and Total Display appeared first on InstruMetrics.

]]> https://instrumetrics.com/product/pd-flowmeter-br3000-rate-and-total-display/feed/ 0 Linear Link TCI https://instrumetrics.com/product/linear-link-tci/ https://instrumetrics.com/product/linear-link-tci/#respond Tue, 15 Mar 2022 12:51:41 +0000 https://instrumetrics.com?post_type=product&p=472 The Linear Link TCI (Temperature-Compensated Interface) represents a new, sophisticated electronics platform for flow meter linearization and viscosity correction.

The post Linear Link TCI appeared first on InstruMetrics.

]]> Intended to meet the demanding requirements of the aerospace, automotive, and process manufacturing industries, the Linear Link TCI provides significant improvements in flowmeter accuracy even under extreme temperature conditions.

The post Linear Link TCI appeared first on InstruMetrics.

]]> https://instrumetrics.com/product/linear-link-tci/feed/ 0 Flow Technology’s Microtrak and Omnitrak https://instrumetrics.com/product/flow-technologys-microtrak-and-omnitrak/ https://instrumetrics.com/product/flow-technologys-microtrak-and-omnitrak/#respond Tue, 15 Mar 2022 12:51:27 +0000 https://instrumetrics.com?post_type=product&p=414 Flow Technology's Microtrak and Omnitrak positive displacement computer-assisted liquid flow meter calibration systems provide performance, reliability, and economical benefits of ownership.

The post Flow Technology’s Microtrak and Omnitrak appeared first on InstruMetrics.

]]> Exceptional accuracy and stability are achieved from a precisely honed, chrome-plated stainless steel cylinder used to displace the fluid used for calibration.

The post Flow Technology’s Microtrak and Omnitrak appeared first on InstruMetrics.

]]> https://instrumetrics.com/product/flow-technologys-microtrak-and-omnitrak/feed/ 0