Vibrations | InstruMetrics

HE055 Vibration Switch

Ariel Oren — Mon, 22 Jun 2026 07:50:28 +0000

The HE055 vibration sensor is an IO-Link-capable sensor designed for measuring vibration velocity or vibration acceleration. It is ideally suited for monitoring absolute bearing vibration on machines in accordance with the DIN ISO 10816 standard. Thanks to IO-Link, the sensor can be easily integrated into modern automation environments, enabling precise and transparent condition monitoring.

Features

IO-Link Interface: Easy integration, configuration, and transmission of process and dynamic data.
Dynamic Data Recording: High-resolution raw data recording (-48…48 g, a-raw) using BLOB (Binary Large Object transfer) for detailed vibration analysis.
Wide Frequency Range: Configurable frequency range up to 12 kHz with a sampling rate of up to 64 kHz.
Two Parametrizable Outputs: * Output 1: IO-Link interface or digital switching output.
- Output 2: Analog current output (4…20 mA, proportional to the measuring range) or digital switching output.
Condition Monitoring & Maintenance: Embedded limit monitoring, counter for threshold violations, and maintenance alarms.
Robust Design: Heavy-duty V2A stainless steel housing with IP66/IP67 protection class, suitable for outdoor use.

The post HE055 Vibration Switch appeared first on InstruMetrics.

HE102 series

Ariel Oren — Mon, 22 Jun 2026 07:24:21 +0000

The HE102 vibration transmitter is a reliable sensor designed for measuring and monitoring absolute vibration acceleration in industrial machinery and components, in accordance with the DIN ISO 10816 standard. It is specifically engineered for the early detection of high-frequency faults—such as early-stage bearing wear or gear defects—enabling safe shutdowns or alerts before catastrophic failures occur.

Features

Vibration Acceleration Measurement: Optimized for monitoring high-speed components and high-frequency structural vibrations.
Flexible Output Options: Features a standard 4…20 mA analog current output proportional to the measuring range, and/or a digital switching (limit) output for alarms or trips.
Easy On-Site Configuration: Integrated potentiometers allow for straightforward adjustment of the switching threshold and response delay time directly on the device.
Wide Frequency Band: Tailored to capture complex high-frequency profiles generated by mechanical stress and friction.
Robust Industrial Design: Heavy-duty stainless steel housing with a high protection rating (IP66/IP67), built to withstand harsh, wet, or dusty environments.
Optional Explosion Protection: Available with ATEX / IECEx certifications for safe deployment in hazardous, potentially explosive atmospheres (Zone 1/21 or Zone 2/22).

The post HE102 series appeared first on InstruMetrics.

HE205 series

Ariel Oren — Tue, 23 Jan 2024 17:58:35 +0000

The Type HE205 vibration monitoring unit measures and monitors vibration acceleration on machines.

The post HE205 series appeared first on InstruMetrics.

HE101 series

Ariel Oren — Tue, 23 Jan 2024 17:39:40 +0000

The Type HE101 vibration monitoring unit is used to measure and monitor absolute bearing vibrations and bearing temperatures in machines in line with DIN ISO 10816.

Features

Measurement value: The effective value (rms) of the vibration velocity in mm/s, in accordance with DIN ISO 2954.
Measurement value: The temperature in °C.
Analogue current output: Interference-free DC signals from 4…20 mA, proportional to the measuring range of the monitoring unit
Approvals: CE, ATEX, EAC, EAC Ex, IEC, IEC Ex, UL

The post HE101 series appeared first on InstruMetrics.

HE100 Vibration Sensor

Ariel Oren — Tue, 23 Jan 2024 11:17:07 +0000

The Type HE100 vibration monitoring unit is used to measure and monitor absolute bearing vibrations in machines in line with DIN ISO 10816.

Features

Operating principle: The two-wire system
Measurement value: The effective value (rms) of the vibration velocity in mm/s, in accordance with DIN ISO 2954
Analogue current output: Interference-free DC signals from 4…20 mA, proportional to the measuring range of the monitoring unit
Approvals: CE, ATEX, EAC, EAC Ex, IEC, IEC Ex, UL

The post HE100 Vibration Sensor appeared first on InstruMetrics.

663 Vibration Switch

admin — Tue, 15 Mar 2022 12:55:11 +0000

The Type 663 vibration monitoring unit is used to measure and monitor absolute bearing vibrations in machines in line with DIN ISO 10816.

Features

Two limit values and associated delay times are separately adjustable.
Both relay outputs indicate if the corresponding set limit values are exceeded. This can be used to generate a preliminary and a main alarm.
Measurement value: The effective value (rms) of the vibration velocity (mm/s).
Approvals: CE, ATEX, EAC, EAC EX, SIL2 / PL-d

The post 663 Vibration Switch appeared first on InstruMetrics.

HE200 Vibration Switch

admin — Tue, 15 Mar 2022 12:55:11 +0000

The Type 663 vibration monitoring unit is used to measure and monitor absolute bearing vibrations in machines in line with DIN ISO 10816 and 20816.

Features

Two limit values and associated delay times are separately adjustable.
Both relay outputs indicate if the corresponding set limit values are exceeded. This can be used to generate a preliminary and a main alarm.
Measurement value: The effective value (rms) of the vibration velocity (mm/s).
Approvals: CE, ATEX, EAC, EAC EX, IEC, IEC Ex, SIL2 / PL-d (TÜV-Süd), C UL.

The post HE200 Vibration Switch appeared first on InstruMetrics.

HE050 Vibration Switch

admin — Tue, 15 Mar 2022 12:55:11 +0000

The vibration monitor type HE050 is an IO‑Link sensor for measuring the vibration speed/acceleration and can be used, for example, to monitor the absolute bearing vibration on machines based on the DIN ISO 10816 standard.

features

Two freely configurable outputs
Output 1: IO-Link or digital switching output
Output 2: Analog current output (4…20 mA) or digital switching output. Many setting options available
Configurable frequency range e.g. 10 Hz … 1000 Hz or 10 Hz … 500 Hz
Optional functional safety SIL 1

The post HE050 Vibration Switch appeared first on InstruMetrics.

Vibration transmitter – iT300

admin — Tue, 15 Mar 2022 12:54:48 +0000

Wilcoxon’s 4-20 mA configurable vibration transmitter module, the iT300, provides an easy means to connect a standard IEPE vibration sensor to a PLC, DCS, or SCADA system. The transmitter’s input provides power to and measures the signal from either an accelerometer, piezo velocity sensor, or dual (vibration and temperature) output sensor.

The input circuitry has a wide frequency response, capable of measuring signals between 0.2 Hz and 20,000 Hz.

iT300 provides the user with field-configurable parameters and dual mappable 4-20 mA outputs. Easy web server interface – Change amplitude scale and frequency ranges remotely, Live updates for near real-time visibility, Eliminate pre-order part selection, saving you time, No standalone software needed. Two processing bands – Optimize vibration frequency ranges, More control over fault monitoring, Provide flexibility. Dual mappable 4-20 mA outputs – Offer a variety of output options, Access more information from single sensor input.

The post Vibration transmitter – iT300 appeared first on InstruMetrics.

Vibration transmitter – iT301

admin — Tue, 15 Mar 2022 12:54:48 +0000

The iT301 vibration transmitter is field configurable to accept IEPE acceleration, velocity, or temperature measurements and convert to 4-20 mA outputs. A single-page internal web server allows the user to easily modify parameters and define the desired outputs via Ethernet. MODBUS communication, a programmable relay, and dynamic data are also accessible.

Wilcoxon’s 4-20 mA configurable vibration transmitter module, the iT301, provides an easy means to connect a standard IEPE vibration sensor to a PLC, DCS, or SCADA system. The transmitter’s input provides power to and measures the signal from either an accelerometer, piezo velocity sensor, or dual (vibration and temperature) output sensor.

The input circuitry has a wide frequency response, capable of measuring signals between 0.2 Hz and 20,000 Hz.

It is also MODBUS/RS485 enabled and contains a single NC/NO relay. Easy web server interface – Change amplitude scale and frequency ranges remotely, Live updates for near real-time visibility, Eliminate pre-order part selection, saving you time, No standalone software needed. MODBUS/RS485 enabled – Optimized for process control and monitoring, Simple connection to existing plant infrastructure, Multiple communication methods via MODBUS TCP, MODBUS Serial, and web browser. Mappable NC/NO relay – Map low and high alarms to single relay, More control over fault monitoring.

The post Vibration transmitter – iT301 appeared first on InstruMetrics.